Market Intelligence: -Training Aircraft Developments

Training Aircraft Manufacturer Tecnam Delivers First P2010 TDI to Italian Flight School

Capua, Italy – Tecnam announced the delivery of the first P2010 TDI to the Italian Approved Training Organization Cantor Air (IT.ATO.0004) which has ordered three four-seater P2010 TDIs and two additional two-seater P2008JCs.

Cantor Air, established in 2007, offers a modern modular pilot training program for Commercial pilots as well as private owners and started its fleet transition to more modern and sustainable platforms in 2017, with the acquisition of their first four Tecnam P2008 JC aircraft.

Seven years later this transition continues with the acquisition of the additional P2008 JC aircraft and the introduction in fleet of the four-seater, IFR, P2010 TDI powered by the Continental CD-170 Diesel/JetA1 engine that will allow the phase out and replacement of ageing legacy aircraft.

Beyond the notable qualities of the P2008 JC, already operated and well established within the ATO since its initial acquisition, the Cantor Air pilots will now also benefit of the P2010 TDI renown performances, capabilities, and comfort.

The “Twenty-Ten” is equipped with advanced avionics based on the state of the art Garmin G1000 Nxi, enhancing the mission accomplishment through Electronic Stability & Protection and Synthetic Vision, significant safety features when flying over the Alps region and during IFR training typical missions of the ATO.

The P2010 airframe, with its wide composite fuselage and the all-metal wing and stabilator, has proven to be the perfect platform to match the CD-170 engine efficiency, combining the easiness of the Single Lever Power Control engine management to an exceptional fuel economy: the aircraft offers an outstanding fuel burn that ranges from just 4.5 USG/hr (17 litres/hr) at 55% power, to 7 USG/hr (27 litres/hr) at 75% power. Nevertheless the engine provides a constant 91% maximum continuous power up to 10,000ft and a maximum operating altitude of 18,000ft, allowing the P2010 TDI to definitely “soar higher”.

More notably the dual FADEC powerplant grants extremely low operating costs and emissions, and the use of Jet Fuels or Sustainable Aviation Fuel. SAF is already available at many airports throughout Europe which means that up to 80% of net CO2 emissions can be saved by its utilization. And with a range beyond 1,200 nm and an endurance on excess of 12 hours, the P2010 Tdi is the perfect choice not only for Flight Training Organizations (which can count on a single refueling for a whole training-day), but for private mobility too.

TECNAM, which produces the most complete, fuel efficient and less emitting fleet (both single and twin engine) for Flight Training Organization, is constantly committed to provide the most achievable and sustainable solutions towards a greener future and successful business for its valuable clients.

Roberto Magnani, Cantor Air Head of Training, said: “With this new P2010 Tdi our pilots will complete their IFR training in a very modern environment Modern pilots need modern machines, to be trained in the most professional and sustainable way. With this new acquisition, Cantor will increase its fleet to 19 aircraft, including three P2010 Tdi and six P2008JC, which will enable them to train more than 250 students annually.

Francesco Sferra, Tecnam P2012 & Special Mission Platforms Sales and Business Development Manager said: “We are proud of supporting the Cantor Air fleet development through the introduction of three P2010 TDI and the addition of two P2008 JC. In a path towards advanced, safe, and sustainable training solutions, Tecnam is in the front line to provide a significant and tangible contribution to enhancing training while reducing emissions.”

About CANTOR AIR
Cantor Air is synonymous with aviation excellence and embodies the vision and expertise of its founders, experts in civil and military aviation. Since its inception, the flight school has been committed to being a point of reference in European aviation training, with an emphasis on excellence and quality training based on the latest military training techniques.

With state-of-the-art teaching methods and a team of highly qualified flight and ground instructors, Cantor Air offers comprehensive training that goes beyond traditional flying skills. The ATO covers critical topics such as flight safety, CBTA and SMS, preparing students to succeed in an ever-evolving industry.

Strong partnerships with major airlines and a 93% retention rate within 6 months of graduating demonstrate the effectiveness of Cantor Air’s approach.

Cantor Air’s mission is to transform aspiring pilots into true professionals, ready to take on the challenges of the skies with confidence and competence.

About TECNAM; “Quality Aircraft since 1948”
Tecnam is an Italian aircraft manufacturer and one of the world’s leading piston aircraft manufacturers. Founded in 1948 by brothers Luigi and Giovanni Pascale, the company is headquartered in Capua, Italy, and operates two subsidiaries in Sebring, Florida, USA, and Brisbane, Australia, to serve and support the needs of local Tecnam owners and operators. Tecnam designs and manufactures a wide range of aircraft for personal use, commercial operations, business travel, flight training, surveillance, law enforcement and other specialised applications.

Source: Tecnam
Photo Credit: Tecnam

Related Posts

Training Aircraft Manufacturer Tecnam Announces US Flight School Partnership with 50 Aircraft on Order

Sebring, FL USA – Tecnam announced a partnership with Buiqui Aerospace, one of the most prestigious flight schools in the USA, with multiple bases in the US and Puerto Rico and strategic partnerships with major airlines and aviation universities.

The announcement of the partnership also coincides with the delivery of two (2) P2006T, one (1) P2010 Lycoming IO-360, one (1) P2010 TDI Gran Lusso and one (1) P-Mentor. The remaining aircraft will be delivered in batches within the second quarter of 2025.

With this acquisition, Buiqui Aerospace will fully transition to a modern and ultimate fleet of Tecnam trainers, allowing more students to begin and complete their training, creating exponential value for Buiqui Aerospace. Flying a Tecnam will give students access to state of the art aircraft, providing them with an enhanced experience throughout their flight training and easing their transition into the cockpit of a commercial aircraft.

Buiqui Aerospace has also been appointed as a Tecnam Authorised Service Centre as its technicians have successfully completed mechanical training at Tecnam’s base in Sebring, Florida.

Oliver Buitron, Buiqui Aerospace Founder and Chief Executive Officer said: “We’re very excited about this partnership with one of the leading companies in the aviation space. TECNAM vision aligns with ours in paving the way by providing the best of the best. The acquisition of these planes will provide a more enhanced experience for all our students, mechanics and staff. It will enrich the flight training experience for current and prospective students. The addition of the 50 Tecnam aircraft to our fleet will allow our students to have more preparation as they continue their pathway to our partners such as Frontier Airlines, Mountain Air Cargo and Commute Air. Our team is looking to be a Tecnam only fleet by 2025, so today will be a massive step towards that goal.”

“We are deeply honored that Buiqui Aerospace has chosen Tecnam to fully replace their existing fleet with our aircraft. This decision underscores the trust and confidence Buiqui Aerospace has in Tecnam’s innovation, performance, and commitment to delivering high-quality solutions for the aviation industry. This partnership marks a significant milestone for both companies, and we are proud to join forces with such a forward-thinking and dynamic organization. Together, we are not only expanding their fleet but also supporting Buiqui Aerospace’s vision for growth, modernization, and excellence in aviation. Tecnam is excited to be part of this journey and looks forward to a long-lasting collaboration that will benefit both companies and the aviation community at large,” said Tecnam’s Managing Director, Giovanni Pascale Langer.

Walter Da Costa, TECNAM’s Chief Sales Officer added: “Solera Bank played a pivotal role in this transaction, aligning closely with Tecnam’s vision and principles. Both organizations are committed to supporting flight schools in fully transitioning to a new era of aircraft, ensuring superior outcomes for pilot cadets, mechanics, and company shareholders alike. This partnership delivers a comprehensive solution that meets the needs of 21st-century businesses.”

About Buiqui Aerospace
The name of the school comes from the combination of the surnames of its founders “Buitron Quijano”, three brothers from Quito (Ecuador) who decided to open an aviation school in the United States. It all began as a family flying club in North Perry, Miami, which in 2018 would transform from a flying club to an aviation school with its main headquarters in the city of Kissimmee, state of Florida; Shortly thereafter, the vision of these three young brothers, became a reality and soon the flight school was fully operational. With more than 350 national and international graduate students, alliances with more than 10 airlines and financial institutions, six locations within the United States and three more in Puerto Rico, Buiqui Aerospace has become a renowned school that continues to open its doors to aspiring pilots, operating under Part 61.

About TECNAM; “Quality Aircraft since 1948”
Tecnam is an Italian aircraft manufacturer and one of the world’s leading piston aircraft manufacturers. Founded in 1948 by brothers Luigi and Giovanni Pascale, the company is headquartered in Capua, Italy, and operates two subsidiaries in Sebring, Florida, USA, and Brisbane, Australia, to serve and support the needs of local Tecnam owners and operators. Tecnam designs and manufactures a wide range of aircraft for personal use, commercial operations, business travel, flight training, surveillance, law enforcement and other specialised applications.

Source: Tecnam
Photo Credit: Tecnam

Related Posts

Spanish Flight School To More than Double Fleet Size With Latest Purchase of 15 Aircraft

Italy headquartered training aircraft manufacturer Tecnam and Aerodynamics Academy have announced the purchase of fifteen (15) Tecnam P2008JC MkII by the flight school.

Headquartered in Malaga, Spain, Aerodynamics Academy is a recognised Approved Training Organisation (ATO) and Flight Training Organisation (FTO) and is one of the fastest growing flight schools in Europe with 200 students in 2024.

The acquisition of the Tecnam P2008 JC aircraft enhances Aerodynamics Academy’s training capabilities and provides students with access to modern, efficient and reliable aircraft that meet industry standards. This move reinforces Aerodynamic Academy’s position as a leading aviation training institution in Europe, providing students with world-class resources for their pilot training journey.

About the P2008JC MkII

The versatility and ease of use of the Tecnam P2008JC has made it the aircraft of choice for modern flight training organisations worldwide.

With its carbon fibre fuselage, metal wings and tailplane, the Tecnam P2008JC has many advantages over traditional aircraft. This combination of composites and metal has resulted in a more fuel efficient and much quieter aircraft.

The Tecnam P2008JC MkII version features a number of significant enhancements. These include a new avionics suite, including a redesigned instrument panel and glare shield, allowing the introduction of Garmin’s innovative G3X Touch display with MD302 attitude instrument, also available in VFR Night.

“We are incredibly excited to partner with Aerodinamics and contribute to their growth and fleet innovation.” said Walter Da Costa, Tecnam Chief Sales Officer.

“Aerodynamics Academy acquires 15 new Tecnam P2008 JC models to expand a fleet of over 30 aircraft and 5 high-generation simulators, solidifying its position as one of Europe’s most promising pilot training schools.” – Juan Manuel Martín. CEO of Aerodynamics Academy.

Tradition, innovation and vision.

These factors are taking Tecnam to new horizons. Based on recent data and industry benchmarks, Tecnam offers the greenest training fleet in the world. Flight schools using Tecnam’s single and twin engine fleet can save up to 10 tonnes of CO2 emissions for each student who completes a Commercial Pilot Licence – a 60% reduction compared to a fleet using 100LL fuel across 155 flight hours, including 30 hours in a twin (www.Tecnam.com/soar-greener).

About Aerodynamics Academy

Aerodynamics Academy, with over 26 years of experience in one of Southern Europe’s most beautiful regions – Malaga – and a climate that allows flying all year round, has facilities where theoretical and practical training take place under one roof. This integrated approach makes pilot training effective and convenient. Aerodynamics provides students with accommodation, transport and a privileged environment that makes the training experience truly exceptional.

About TECNAM; “Quality Aircraft since 1948”

Tecnam is an Italian aircraft manufacturer and one of the world’s leading piston aircraft manufacturers. Founded in 1948 by brothers Luigi and Giovanni Pascale, the company is headquartered in Capua, Italy, and operates two subsidiaries in Sebring, Florida, USA, and Brisbane, Australia, to serve and support the needs of local Tecnam owners and operators. Tecnam designs and manufactures a wide range of aircraft for personal use, commercial operations, business travel, flight training, surveillance, law enforcement and other specialised applications.

Source: Tecnam Aircraft

Related Posts